論文リスト


Journal Papers

[1] T. Kishimoto, H. Hachisu, J. Fujiki, K. Nagato, M. Yasuda, H. Katori, “Electrodynamic Trapping of Spinless Neutral Atoms with an Atom Chip”, Phys. Rev. Lett. 96 (2006) 123001-1-4.

[2] K. Nagato, T. Ooi, T. Kishimoto, H. Hachisu, H. Katori, M. Nakao, “Design and Prototyping of Stark Atom Chip for Electric Trapping of Laser-Cooled Atoms”, Precis. Eng. 30 (2006) 387-395.

[3] K. Kasuya, K. Nagato, Y. Jin, H. Morii, T. Ooi, and M. Nakao, “Rapid and Local Synthesis of Single-Walled Caron Nanotubes by Laser-Assisted Chemical Vapor Deposition”, Jpn. J. Appl. Phys. 46 (2007) L333-L335.

[4] Y. Kojima, K. Kasuya, T. Ooi, K. Nagato, K. Takayama, and M. Nakao, “Effects of Oxidation during Synthesis on Structure and Field-Emission Property of Tungsten Oxide Nanowires”, Jpn. J. Appl. Phys. 46 (2007) 6250-6253.

[5] K. Nagato, Y. Kojima, K. Kasuya, H. Moritani, T. Hamaguchi, and M. Nakao, “Local Synthesis of Tungsten Oxide Nanowires by Current Heating of Designed Micropatterned Wires”, Appl. Phys. Express, 1 (2008) 014001-1-3.

[6] K. Nagato, S. Sugiyama, A. Yanagida, J. Yanagimoto, “Single-Pass Severe Plastic Forming of Ultrafine-Grained Plain Carbon Steel”, Mater. Sci. Eng. A, 478 (2008) 376-383.

[7] K. Nagato, H. Tani, Y. Sakane, N. Toyoda, I. Yamada, M. Nakao, and T. Hamaguchi, “Study of Gas Cluster Ion Beam Planarization for Discrete Track Magnetic Disks”, IEEE Trans. Magn., 44 (2008) 3476-3479.

[8] H. Suzuki, K. Nagato, S. Sugimoto, K. Tsuchiya, T. Hamaguchi, M. Nakao, “Iterative imprint for multilayered nanostructures by feeding, vacuum forming and bonding of sheets”, J. Vac. Sci. Technol. B 26 (2008) 1753-1756.

[9] T. Hamaguchi, H. Yonemoto, K. Nagato, K. Tsuchiya, M. Nakao, “Single-pass forming for three-dimensional microstructures by high-speed shearing of multilayer thin films”, J. Vac. Sci. Technol. B 26 (2008) 1771-1774.

[10] Y. Kojima, K. Kasuya, K. Nagato, T. Hamaguchi, M. Nakao, “Solid-Phase Growth Mechanism of Tungsten Oxide Nanowires Synthesized on Sputtered Tungsten Film”, J. Vac. Sci. Technol. B 26 (2008) 1942-1947.

[11] K. Nagato, T. Ide, N. Ohno, M. Nakao, T. Hamaguchi, “Automatic Unbalance Correction of Rotors by Sympathetic Phase Inversion of UV-Curing Resin”, Precision Engineering 33 (2009) 243-247.

[12] N. Toyoda, K. Nagato, H. Tani, Y. Sakane, M. Nakao, T. Hamaguchi, I. Yamada, “Planarization of Amorphous Carbon Films on Patterned Media Using Gas Cluster Ion Beams”, J. Appl. Phys. 105 (2009) 07C127-1-3.

[13] N. Toyoda, T. Hirota, K. Nagato, H. Tani, Y. Sakane, M. Nakao, T. Hamaguchi, I. Yamada, “Planarization of bit-patterned surface using gas cluster ion beams”, IEEE Trans. Magn. 45 (2009) 3503-3506.

[14] K. Nagato, S. Sugimoto, T. Hamaguchi, M. Nakao, “Iterative roller imprint of multilayered nanostructures”, Microelectron. Eng. 87 (2010) 1543-1545.

[15] M. Furubayashi, K. Nagato, H. Moritani, T. Hamaguchi, M. Nakao, “Field emission properties of discretely synthesized tungsten oxide nanowires”, Microelectron. Eng. 87 (2010) 1594-1596.

[16] S. Hattori, K. Nagato, T. Hamaguchi, M. Nakao, “Rapid injection molding of high-aspect-ratio nanostructures”, Microelectron. Eng. 87 (2010) 1546-1549.

[17] K. Nagato, H. Hoshino, H. Naito, T. Hirota, H. Tani, Y. Sakane, N. Toyoda, I. Yamada, M. Nakao, T. Hamaguchi, “Planarization of nonmagnetic films on bit patterned substrates by gas cluster ion beams”, IEEE Trans. Magn. 46 (2010) 2504-2506.

[18] K. Nagato, H. Moritani, T. Hamaguchi, M. Nakao, “Fabrication of antireflection-structured surface using vertical nanowires as an initial structure”, J. Vac. Sci. Technol. B 28 (2010) L39-L42.

[19] K. Nagato, M. Furubayashi, T. Hamaguchi, M. Nakao, “Direct synthesis of a-Fe2O3 nanowires from sputtered thin film”, J. Vac. Sci. Technol. B 28 (2010) C6P11-13.

[20] K. Nagato, S. Hattori, T. Hamguchi, M. Nakao, "Rapid thermal imprinting of high-aspect-ratio nanostructures by dynamic heating of mold surface", J. Vac. Sci. Technol. B 28 (2010) C6M122-124.

[21] K. Nagato, N. Toyoda, H. Naito, H. Tani, Y. Sakane, I. Yamada, M. Nakao, T. Hamaguchi, "Effect of duty ratio of patterned surface on planarization by gas cluster ion beams", J. Appl. Phys. 109 (2011) 07B733-1-3.

[22] K. Nagato, H. Hoshino, T. Hamaguchi, M. Nakao, “Slurry mixing device with microchannels for gelcasting”, Microelectron. Eng. 88 (2011) 1814-1816.

[23] K. Nagato, S. Inoue, M. Furubayashi, S. Chiashi, S. Maruyama, T. Hamaguchi, M. Nakao, “Field emission of vertically aligned single-walled carbon nanotubes patterned by pressing a microstructured mold”, Microelectron. Eng. 88 (2011) 2700-2702.

[24] K. Nagato, M. Furubayashi, T. Hamaguchi, M. Nakao, “Patterning of a-Fe2O3 nanowires by pressing a microstructured mold and their field-emission properties”, Microelectron. Eng. 88 (2011) 2697-2699.

[25] K. Nagato, T. Hamaguchi, M. Nakao, “Injection compression molding of high-aspect-ratio nanostructures”, J. Vac. Sci. Technol. B 29 (2011) 06FG10-1-4.

[26] K. Sekiya, K. Nagato, T. Hamaguchi, M. Nakao, “Morphology control of nickel oxide nanowires”, Microelectron. Eng. 98 (2012) 532-535. http://dx.doi.org/10.1016/j.mee.2012.07.049

[27] Y. Li, K. Nagato, J.-J. Delaunay, J. Kubota, and K. Domen, “Fabrication of highly ordered Ta2O5 and Ta3N5 nanorod arrays by nanoimprinting and through-mask anodization”, Nanotechnology 25 (2014) 014013-1-8.

[28] K. Nagato, “Injection compression molding of replica molds for nanoimprint lithography”, Polymers 6 (2014) 604-612. doi:10.3390/polym6030604

Proceedings in International Conference

[1] ○K. Nagato, Ohshige, T. Ooi, K. Tsuchiya, T. Hamaguchi, M. Nakao, “Fabrication of Atom Trap Chip for Quantum Information Processing”, Proceedings of 19th American Society for Precision Engineering (ASPE) Annual Meeting, Orland, FL, Oct. 24, 2004. (Oral presentation)

[2] ○K. Nagato, T. Ooi, T. Kishimoto, H. Hachisu, H. Katori, M. Nakao, “Prototyping of Atomic Conveyer for Quantum Devices”, Proceedings of 20th American Society for Precision Engineering (ASPE) Annual Meeting, Norfolk, VA, Oct. 9-14, 2005, 106-109. (Oral presentation)

[3] K. Kasuya, Y. Jin, K. Nagato, ○T. Ooi, K. Tsuchiya, T. Hamaguchi, M. Nakao, “Pinpoint Synthesis of Carbon Nanotubes using Focused Beams”, Proceedings of 20th American Society for Precision Engineering (ASPE) Annual Meeting, Norfolk, VA, Oct. 9-14, 2005, 476-479. (Poster presentation)

[4] ○T. Kishimoto, H. Hachisu, J. Fujiki, K. Nagato, M. Yasuda, H. Katori, “Electrodynamic trapping of neutral strontium atoms”, Digest of 2005 European Quantum Electronics Conference, EQEC ’05, 1467-1468. (IQEC, International Quantum Electronics Conference), Munich, Germany, June 12-17, 2005. (Poster presentation)

[5] ○Y. Jin, K. Kasuya, K. Nagato, H. Morii, T. Ooi, M. Nakao, “Local Synthesis of Single-walled Carbon Nanotubes on Zeolite-covered Silicon Substrate by Laser-heating Chemical Vapor Deposition”, Proceedings of 2nd IEEE-NEMS (Nano- and Micro-Engineered and Molecular Systems), Bangkok, Thailand, Jan. 16-19, 2007, 462-466. (Oral presentation)

[6] ○Y. Kojima, K. Nagato, K. Kasuya, H. Moritani, M. Nakao, “Pinpoint Synthesis of Tungsten Oxide Nanowires using Heat Controlling Layer”, Proceedings of 22nd American Society for Precision Engineering (ASPE) Annual Meeting, Dallas, TX, Oct. 14-19, 2007, 105-108. (Oral presentation)

[7] ○K. Nagato, H. Hamaguchi, T. Ide, N. Ohno, K. Tsuchiya, M. Nakao, “Self-Unbalance-Correction Technique for Production of Precision High-Speed Rotors”, Proceedings of 22nd American Society for Precision Engineering (ASPE) Annual Meeting, Dallas, TX, Oct. 14-19, 2007, 453-456. (Poster presentation)

[8] ○S. Sugimoto, H. Morii, K. Nagato, K. Tsuchiya, T. Hamaguchi, M. Nakao, “Plasmon Resonance Enhanced Scanning Near-field Optical Microscope Probes for Single Fluorescent Molecule Observation”, Proceedings of 22nd American Society for Precision Engineering (ASPE) Annual Meeting, Dallas, TX, Oct. 14-19, 2007, 97-100. (Oral presentation)

[9] ○Y. Sugiue, H. Morii, K. Nagato, K. Tsuchiya, H. Hamaguchi, M. Nakao, “Photocatalytic Nano-imprinting Using Direct Near-field Oxidation”, Proceedings of 22nd American Society for Precision Engineering (ASPE) Annual Meeting, Dallas, TX, Oct. 14-19, 2007, 299-302. (Poster presentation)

[10] ○K. Nagato, H. Tani, Y. Sakane, N. Toyoda, I. Yamada, M. Nakao, and T. Hamaguchi, “Study of Gas Cluster Ion Beam Planarization for Discrete Track Magnetic Disks”, Digest of INTERMAG (International Magnetic Conference, IEEE Magnetics Society), Madrid, Spain, May 4-8, 2008, p. 552 (DA-11). (Oral presentation)

[11] M. Nakao, ○K. Nagato, H. Suzuki, T. Nishino, H. Yonemoto, H. Kaito, T. Hamaguchi and K. Tsuchiya, “Sub-wavelength Pitched Cubic Mosaic Multi-layer Precisely Pressed by Nano-features Mold for Multi-functional Optical Elements”, Proceedings of the 41st CIRP Conference on Manufacturing Systems, The University of Tokyo, Japan, May 26-28, 2008, 449-452. (Oral presentation)

[12] ○H. Kaito, K. Nagato, K. Kasuya, K. Tsuchiya, H. Hamaguchi, M. Nakao, “Local Synthesis of Carbon Nanotubes by Electron Beam-Heating Chemical Vapor Deposition”, Proceedings of 23rd American Society for Precision Engineering (ASPE) Annual Meeting, Portland, OR, Oct. 19-24, 2008, pp. 522-525. (Poster presentation)

[13] ○H. Moritani, K. Nagato, Y. Kojima, M. Furubayashi, K. Kasuya, T. Hamaguchi, M. Nakao, “Multi-sectional Synthesis of Tungsten Oxide Nanowires Using Micropatterned Layer for Field-Emission Displays”, Proceedings of 23rd American Society for Precision Engineering (ASPE) Annual Meeting, Portland, OR, Oct. 19-24, 2008, pp. 514-517. (Poster presentation)

[14] ○J. Yanagimoto, K. Nagato, S. Sugiyama, “Ultrafine-grained steel by hot extrusion”, International Conference of Technology of Plasticity (ICTP), Kyeongju, Korea, Sep. 7-11, 2008. (Invited, oral presentation)

[15] N. Toyoda, K. Nagato, H. Tani, Y. Sakane, M. Nakao, T. Hamaguchi, ○I. Yamada, “Planarization of Amorphous Carbon Films on Patterned Media Using Gas Cluster Ion Beams”, Digest of 53rd Magnetism and Magnetic Materials Conference (MMM 2008), Austin, TX, Nov. 10-14, 2008. (Oral presentation)

[16] N. Toyoda, T. Hirota, K. Nagato, H. Tani, ○Y. Sakane, T. Hamaguchi, M. Nakao, I. Yamada, “Planarization of bit patterned surface with gas cluster ion beams”, Digest of INTERMAG (International Magnetic Conference, IEEE Magnetic society), Sacramento, CA, USA, May 4-8, 2009, AC-07. (Oral presentation)

[17] ○S. Sugimoto, K. Nagato, T. Hamaguchi, M. Nakao, “Iterative roller imprint of multilayered nanostructures”, Digest of Micro- and Nano- Engineering (MNE), Ghent, Belgium, Sep 28-Oct 1, 2009. (Poster presentation)

[18] ○M. Furubayashi, K. Nagato, H. Moritani, T. Hamaguchi, M. Nakao, “Field emission properties of discretely synthesized tungsten oxide nanowires”, Digest of Micro- and Nano- Engineering (MNE), Ghent, Belgium, Sep 28-Oct 1, 2009. (Poster presentation)

[19] ○S. Hattori, K. Nagato, T. Hamaguchi, M. Nakao, “Rapid injection molding of high-aspect-ratio nanostructures”, Digest of Micro- and Nano- Engineering (MNE), Ghent, Belgium, Sep 28-Oct 1, 2009. (Poster presentation)

[20] ○H. Hoshino, K. Nagato, H. Naito, T. Hirota, H. Tani, Y. Sakane, N. Toyoda, I. Yamada, M. Nakao, T. Hamaguchi, “Planarization of nonmagnetic films on bit patterned substrates by gas cluster ion beams”, Digest of 11th Joint MMM-Intermag Conference, Washington DC, USA, Jan 18-22, 2010. (Oral presentation)

[21] ○K. Nagato, M. Furubayashi, T. Hamaguchi, M. Nakao, “Direct synthesis of vertical -Fe2O3 nanowires from sputtered Fe thin film”, Digest of the 54th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Anchorage, AL, USA, Jun 1-4, 2010. (Poster presentation)

[22] ○K. Nagato, S. Hattori, T. Hamaguchi, M. Nakao, “Rapid thermal imprint of high-aspect-ratio nanostructures with dynamically heating of mold surface”, Digest of the 54th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Anchorage, AL, USA, Jun 1-4, 2010. (Poster presentation)

[23] ○Hiroaki Hoshino, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, “Slurry mixing device with microchannels for gelcasting”, Digest of the 36th International Conference on Micro & Nano Engineering (MNE), Genova, Italy, Sep 20 (19-22), 2010. (Poster presentation)

[24] ○Shota Inoue, Keisuke Nagato, Masaki Furubayashi, Shohei Chiashi, Shigeo Maruyama, Tetsuya Hamaguchi, Msayuki Nakao, “Field emission of vertically aligned single-walled carbon nanotubes patterned by pressing a microstructured mold”, Digest of the 36th International Conference on Micro & Nano Engineering (MNE), Genova, Italy, Sep 20 (19-22), 2010. (Poster presentation)

[25] ○Masaki Furubayashi, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, “Patterning of iron oxide nanowires by pressing a microstructured mold”, Digest of the 36th International Conference on Micro & Nano Engineering (MNE), Genova, Italy, Sep 20 (19-22), 2010. (Poster presentation)

[26] ○Atsushi Yamamoto, Jun Suzurikawa, Keisuke Nagato, Tadashi, Tsukada, Aya Tanaka, Tetsuya Hamaguchi, Masayuki Nakao, “Biomolecular-imaging device using light-addressed excitation on a photocatalyst substrate”, Proceedings of the 24th American Society for Precision Engineering (ASPE), Atlanta, Nov 2(1-4), 2010, 385-388 (Poster presentation)

[27] ○Takehiro Mitsuda, Keisuke Nagato, Shuntaro Hattori, Tetsuya Hamaguchi, Masayuki Nakao, “Heat-controlled injection molding of nanostructured optical elements”, Proceedings of the 24th American Society for Precision Engineering (ASPE), Atlanta, Nov 2(1-4), 2010, 348-351 (Poster presentation)

[28] ○Ryo Nakajima, Keisuke Nagato, Yasuhiro Kawamoto, Hirotoshi Kaito, Masayuki Nakao, Tetsuya Hamaguchi, “Fast detection of micro defects using magnetic nondestructive testing methods” Proceedings of the 24th American Society for Precision Engineering (ASPE), Atlanta, Nov 2(1-4), 2010, 364-367 (Poster presentation)

[29] ○Makoto Shimoda, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, “Penetration of residual layer in nanoimprint lithography by direct oxidation of photocatalytic films”, Proceedings of the 24th American Society for Precision Engineering (ASPE), Atlanta, Nov 2(1-4), 2010, 352-355 (Poster presentation)

[30] ○K. Nagato, N. Toyoda, H. Naito, H. Tani, Y. Sakane, I. Yamada, M. Nakao, T. Hamaguchi, "Effect of duty ratio of patterned surface on planarization by gas cluster ion beams", Digest of Magnetism and Magnetic Materials (MMM), Atlanta, Nov 17(14-18), 2010 (Poster presentation)

[31] ○K. Nagato, T. Hamaguchi, M. Nakao, “Injection compression molding of high-aspect-ratio nanostructures”, Digest of the 55th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), P13-27, Las Vegas, NV, USA, 1 Jun (31May-3Jun), 2011. (Poster presentation)

[32] ○K. Nagato, T. Hamaguchi, M. Nakao, “Copper oxide nanowire arrays synthesized from sputtered Cu thin film” Digest of the 55th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), P13-19, Las Vegas, NV, USA, 1 Jun (31May-3Jun), 2011. (Poster presentation)

[33] ○Toshimi Sato, Keisuke Nagato, Junho Choi, Tetsuya Hamaguchi, Masayuki Nakao, “Laser-Assisted Imprinting of Nanostructured Glass”, Proceedings of the 11th IEEE International Conference on Nanotechnology (IEEE NANO), 1-4, Aug 15-18, 2011, Portland, Oregon, USA. (Invited, oral presentation)

[34] ○Daisuke Suehiro, Keisuke Nagato, Tetsuya Hamaguchi, M. Nakao, “Fabrication of antireflection structure by simple annealing of Fe film”, Proceedings of the 11th IEEE International Conference on Nanotechnology (IEEE NANO), 588-591, Aug 15-18, 2011, Portland, Oregon, USA. (Poster presentation)

[35] ○Yuu Uriya, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, “Reductive-Gas Sensor using Iron Oxide Nanowires”, Proceedings of the 11th IEEE International Conference on Nanotechnology (IEEE NANO), 1465-1468, Aug 15-18, 2011, Portland, Oregon, USA. (Oral presentation)

[36] ○Shota Ikeshima, Keisuke Nagato, Kazuyasu Sugiyama, Shu Takagi, Tetsuya Hamaguchi, Masayuki Nakao, “Nanoparticle Control of Slurry Flow in Microchannel”, Proceedings of the 11th IEEE International Conference on Nanotechnology (IEEE NANO), 1728-1732, Aug 15-18, 2011, Portland, Oregon, USA. (Poster presentation)  Won the excellent paper award

[37] ○Shu Wakabayashi, Yasuhiro Kawamoto, Keisuke Nagato, Shinichi Mutou, Masayuki Nakao, Tetsuya Hamaguchi, “Investigation of excavation behavior with model experiment and distinct element method (DEM) simulation using irregularly shaped particles”, Proceedings of the 17th International Conference of the International Society for Terrain-Vehicle Systems (ISTVS), Sep. 18-22 (22), 2011, Blacksburg, VA, USA. (Oral presentation)

[38] ○Kaname Sekiya, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, “Morphology control of nickel oxide nanowires”, Digest of 37th International Conference on Micro and Nano Engineering (MNE), 19-23 (22) Sep. 2011, Berlin, Germany. (Poster presentation)

[39] ○Toshimi Sato, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, “Laser-scanning imprinting for large-area nanostructures”, Digest of 37th International Conference on Micro and Nano Engineering (MNE), 19-23 (22) Sep. 2011, Berlin, Germany. (Poster presentation)  Won the best poster award.

[40] ○M. Shimoda, K. Nagato, T. Hamaguchi, M. Nakao, “Photolithography with periodic multilayered resist film for photonic crystals”, Digest of the 24th International Microprocess and Nanotechnology Conference (MNC), 26P-7-74, 24-27 (26) Oct. 2011, Kyoto, Japan (Poster presentation)

[41] ○K. Nagato, R. Nakajima, Y. Kawamoto, Y. Ohta, H. Shichino, M. Nakao, T. Hamaguchi, “Investigation of boundary lubricating films developing on gear material under high-pressure twin disk test”, Digest of International Tribology Conference (ITC), P06-01, 30 Oct -3 Nov (2 Nov), 2011, Hiroshima, Japan (Poster presentation)

[42] ○K. Nagato, T. Sato, T. Hamaguchi, M. Nakao, “Effect of offset temperature on replication of laser-assisted imprinting”, Digest of the 56th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Waikoloa, Hawaii, USA, May 30 (May29-Jun1), 2012. (Poster presentation)

[43] ○K. Nagato, T. Hamaguchi, M. Nakao, “Injection compression molding of replica molds for nanoimprint lithography”, Digest of the 56th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Waikoloa, Hawaii, USA, May 30 (May29-Jun1), 2012. (Poster presentation)

[44] ○T. Sato, K. Nagato, J. Choi, T. Hamaguchi, M. Nakao, “Laser-scanning imprinting for large-area nanostructures”, Digest of the 56th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Waikoloa, Hawaii, USA, May 30 (May29-Jun1), 2012. (Invited Poster)

[45] ○Remnev Alexey, Shalnov Konstantin, Uemura Kensuke, Keisuke Nagato, “Efffect of Plasma Properties and Set-Up Geometry on Medical Needles Finishing with Ion Plasma Sputtering Method”, 4th International Symposium on Advanced Plasma Science and its Applications for Nitrides and Nanomaterials (ISPlasma2012), Chuo University, 4-8 March 2012.

[46] ○Keisuke Nagato, Daisuke Suehiro, Toshimi Sato, Shota Ikeshima, Yasuaki Watanabe, Masayuki Nakao, “Roller Replication of Nano-/Microstructures of Polymers, Glasses, Metals, and Ceramics”, The 3rd International Conference on Nanomanufacturing (nanoMan2012), 25-27(26) July 2012, Saitama, Japan (Oral presentation)  Won Excellent Young Researcher Award

[47] ○Yasuyuki Watanabe, Keisuke Nagato, Naoki Shikazono, Tetsuya Hamaguchi, Masayuki Nakao, “Improvement of heat transfer coefficient of boiling surface on nanostructured metal using nanoimprinting”, Proceedings of the 26th American Society for Precision Engineering (ASPE) Annual Meeting, San Diego, CA, USA, Oct 24(21-26), 2012, 46-49 (Oral presentation)

[48] ○Shota Ikeshima, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, “Orienattion control of anisotropic particle by shear force”, Proceedings of the 26th American Society for Precision Engineering (ASPE) Annual Meeting, San Diego, CA, USA, Oct 23(21-26), 2012, 316-319 (Poster presentation)

[49] ○Takuma Yamauchi, Keisuke Nagato, Shota Ikeshima, Tetsuya Hamaguchi, Masayuki Nakao, “Micromixer of multi-material slurry with rotation-split-combination cycle for ceramic components”, Proceedings of the 26th American Society for Precision Engineering (ASPE) Annual Meeting, San Diego, CA, USA, Oct 23(21-26), 2012, 359-362 (Poster presentation)

[50] ○Shunta Shinagawa, Keisuke Nagato, Naoki Shikazono, Tetsuya Hamaguchi, Masayuki Nakao, “Enhancement of power efficiency of solid oxide fuel cells by aligning microstructure path of ion/electron/gas in anode”, Proceedings of the 26th American Society for Precision Engineering (ASPE) Annual Meeting, San Diego, CA, USA, Oct 23(21-26), 2012, 343-346 (Poster presentation)

[51] Keisuke Nagato, ○Ryunosuke Fujisawa, Daisuke Suehiro, M. Kikuta, Tetsuya Hamaguchi, Masayuki Nakao, “Antireflection structure fabricated by changing Fe2O3 nanowires to Fe3O4 nanocones”, Digest of 38th International Conference on Micro and Nano Engineering (MNE), 16-20 Sep. 2012, Toulouse, France. (Oral presentation)

[52] Keisuke Nagato, ○Ryota Nakabayashi, Tetsuya Hamaguchi, Masayuki Nakao, “High-speed shearing of multilayered light-waveguide”, Digest of 38th International Conference on Micro and Nano Engineering (MNE), 16-20 Sep. 2012, Toulouse, France. (Poster presentation)

[53] Omar Alghurair, Alexey Remnev, Keisuke Nagato, ○Shota Ikeshima, Yasunori Ono, Kensuke Uemura, Masayuki Nakao, “Investigation of Insertion Phenomena with Needles Treated by Plasma Etching”, The First CIRP Conference on Bio manufacturing, 4-6 Mar. 2013, The University of Tokyo, Tokyo. (Oral presentation) (In: Procedia CIRP 5 (2013) 53-56)

[54] Keisuke Nagato, Naoki Shikazono, André Weber, Dino Klotz, Masayuki Nakao, and Ellen Ivers-Tiffée, “SOFC Anode Fabricated by Magnetically Aligning of Ni Particles”, ECS Transasctions, 57 (2013) 1307-1311. SOFC Symposium, 7-11 (9, OA-31) Oct. 2013. (Oral presentation)

[55] ○Ken Takahashi, Keisuke Nagato, Toshimi Sato, Daisuke Suehiro, Tetsuya Hamaguchi, Masayuki Nakao, “Laser-assisted roller imprinting of nanostructures with real-time monitoring of replication degree”, American Society for Precision Engineering (ASPE) Annual Meeting 2013, 20-25(22,23) Oct 2013, St. Paul, Minnesota, USA (poster presentation).

[56] ○Takuma Yamauchi, Shota Ikeshima, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, “Continuous and fast manufacturing technique of ion-conducting ceramic compacts with oriented anisotropic particle”, American Society for Precision Engineering (ASPE) Annual Meeting 2013, 20-25(22,23) Oct 2013, St. Paul, Minnesota, USA (poster presentation).

[57] ○Shunta Shinagawa, Keisuke Nagato, Naoki Shikazono, Tetsuya Hamaguchi, Masayuki Nakao, “Orientation-controlled microfabrication of anode of solid oxide fuel cells”, American Society for Precision Engineering (ASPE) Annual Meeting 2013, Vol. 56, 243-246. 20-25(22,23) Oct 2013, St. Paul, Minnesota, USA (poster presentation).