東京大学大学院工学系研究科機械工学専攻　長藤・木崎研究室
東京大学大学院工学系研究科機械工学専攻　長藤・木崎研究室
東京大学大学院工学系研究科機械工学専攻　長藤・木崎研究室

業績

Proceedings In International Conference

Invited / Keynote, 　 Oral, 　 Poster
  1. Shun Tanaka, Yuta Teshima, Toru Kizaki, Kenichi Tomita, Naohiko Sugita, ”Thermal Error Estimation of Machine Tools by Data-Fit Models Based on Multi-Point Temperature Sensor”, ASPEN 2023, Nov. 21th – Nov. 24th, 2023, Hongkong, China.
  2. Yifu Liao, Jiahui Liu, Toru Kizaki, Keisuke Nagato, Masayuki Nakao, Naohiko Sugita, ”Vibrational Monitoring and Analysis of Tool Wear Mechanism in High-Speed Micro-Grinding”, ASPEN 2023, Nov. 21th – Nov. 24th, 2023, Hongkong, China.
  3. Liu Jiahui, Yifu Liao, Zongwei Ren, Toru Kizaki, Naohiko Sugita, “Experimental Study on the Relationship Between Tool Wear and High-Frequency Vibration in Ceramic Grinding”, 17th International Conference High Speed Machining (HSM 2023), Oct. 25th – Oct. 28th, 2023(Extended from original date due to COVID), Nanjing, China.
  4. Haonan Ren, Toru Kizaki, Toshifumi Katsuma, Naohiko Sugita, “Simulation of Continuous Generating Gear Grinding”, 11th CIRP Global Web Conference (CIRPe 2023), Oct. 24th – Oct. 26th, 2023, Online(Purdue University).
  5. Chao Wang, Toru Kizaki, Zongwei Ren, Naohiko Sugita, “Fabrication of an intelligent cutting tool for in-situ temperature monitoring using fused deposition modelling technology”, Leading Edge Manufacturing/Material and Processing (LEM&P2023), Jun. 12 – Jun. 16, 2023, Rutgers University, New Brunswick, NJ , USA
  6. Yuta Teshima, Shun Tanaka, Toru Kizaki, Kenichi Tomita, Shinji Tsujimura, Naohiko Sugita, Robust estimation of thermal displacement using an array of temperature sensors and a reduced order model, Leading Edge Manufacturing/Material and Processing (LEM&P2023), Jun. 12 – Jun. 16, 2023, Rutgers University, New Brunswick, NJ , USA
  1. A. Tanaka, K. Nagato, M. Tomizawa, G. Inoue, M. Nakao, Modeling of Relative Humidity-Dependent Impedance of Polymer Electrolyte Membrane Fuel Cells, 242nd The Electrochemical Society (ECS) meeting, I01A-1366, Atlanta, USA, October, 2022.
  2. Shun Tanaka, Toru Kizaki, Akihiro Arimoto, Naoki Hashimoto, Syuta Irako, Yuta Teshima, Kazunori Iijima, Tomofumi Uwano, Naohiko Sugita, High-speed high-accuracy thermal displacement measurement of machine tools using optical frequency comb ranging, The 19th International Conference on Precision Engineering, Nov. 28 – Dec. 2, 2022, Nara, Japan.
  3. Toru Kizaki, Qinru Zheng, Liming Shu, Junichi Tanaka, Toshifumi Katsuma, On reduction of energy flow into workpiece in continuous generating grinding. CIRP General Assembly, Online, August 2022.
  4. Shun Tanaka, Toru Kizaki, Kenichi Tomita, Shinji Tsujimura, Hisashi Kobayashi, Naohiko Sugita, Direct Observation of Temperature Distribution in Ball Screw Feed Drive System Using Wireless Multi-Point Series Temperature Measurement, 55th CIRP Conference on Manufacturing Systems, June 29 – July 1, 2022, Lugano, Switzerland.
  5. Makoto Kato, Toru Kizaki, Tomofumi Uwano, Kazunori Iijima, Yasuhiro Kakinuma, Development of temperature analysis environment for Cyber-Physical System on IoT platform: a study of dynamical properties under temperature change in machine tool spindle unit using carbon fiber reinforced plastics, 55th CIRP Conference on Manufacturing Systems, June 29 – July 1, 2022, Lugano, Switzerland.
  6. Jiahui Liu, Toru Kizaki, Shogo Yamaura, Naohiko Sugita, Establishment of Mode Shape Database for Machine Tool and its Application in Estimating System Dynamics, MSEC2022, June27- July 1, 2022, West Lafayette, Indiana, USA.
  1. M. Tomizawa, K. Nagato, A. Tanaka, K. Nagai, & M. Nakao. “Effect of micro-patterned membrane PEFC dependent on operating current density.” 240th the Electrochemical Society (ECS) Meeting, Virtual conference, October, 2021.
  2. A. Tanaka, K. Nagato, M. Tomizawa, K. Nagai, & M. Nakao. “Development of the soaking method for manufacturing polymer electrolyte fuel cells with a high-aspect-ratio microstructure.” 240th the Electrochemical Society (ECS) Meeting, Virtual conference, October, 2021.
  3. K. Nagai, T. Osa, T. Araki, G. Inoue, T. Tsujiguchi, Y. Kuroda, M. Tomizawa, M. Kurosu, & K. Nagato. “Parameter optimization in the drying process of catalyst ink for PEFC electrode films with few cracks.” 240th the Electrochemical Society (ECS) Meeting, Virtual conference, October, 2021.
  4. Y. Hyugaji, T. Araki, K. Nagato, K. Nagai, T. Tsujiguchi, K. Asaoka, & D. Suzuki. “MEMS sensor development for making PEFC catalyst layer during drying process.” 2nd Asian Conference on Thermal Sciences (ACTS), Virtual conference, October, 2021.
  5. A. Tanaka, K. Nagato, M. Tomizawa, K. Nagai, & M. Nakao. “Evaluation of polarization resistance of line-and-space paterned polymer electrolyte fuel cells using distribution of relaxation times.” European Fuel Cell Forum (EFCF) 2021, Virtual conference, June, 2021.
  6. Kota Aono, Keisuke Nagato, Yusuke Ebihara, Yuki Adachi, Shingo Okuno, Masayuki Nakao, “Laser-assisted bonding of nanotextured metal/fluoropolymer films”, ASPE 2021 Spring Topical Meeting – Freeform and Structured Surfaces, April 28-29, 2021 (EST).
  7. T. Niho, K. Nagato, M. Nakao, “Investigation of three-dimensional geometry of butterfly martensite and analysis of relationship between hardness of lath/butterfly two- phase martensite and its grain thickness in medium-carbon steel”, 1016 MSF (2021) 1039-1044.
  8. Qinru Zheng, Toru Kizaki, Liming Shu, Junichi Tanaka, Toshifumi Katsuma, Naohiko Sugita, Dry continuous generating grinding based on specific energy and heat partition ratio, International Conference on Leading Edge Manufacturing in 21st Century (LEM21), November 14 – 18, Online, 2021.
  9. Shun Tanaka, Yuya Marukawa, Toru Kizaki, Kenichi Tomita, Shinji Tsujimura, Daisuke Noda, Hisashi Kobayashi, Naohiko Sugita, Development of a robust and real-time thermal deformation prediction system for machine tool by multi-point temperature measurement, International Mechanical Engineering Congress and Exposition (IMECE2021), November 1-5,Virtual online, 2021.
  10. Toru Kizaki, Shinji Tsujimura, Yuya Marukawa, Shigeo Morimoto, Hisashi Kobayashi, Robust and accurate prediction of thermal error of machining centers under operations with cutting fluid supply, CIRP General Assembly, Online, August 2021.
  1. R. Itadani, T. Matsunaga, S. Koshizuka, K. Nagato, S. Morita, K. Nishiyachi and T. Shibuya, “A surface tension model in LSMPS using Quadric Surface Fitting”, The 3rd International Conference on COMPSAFE(Computational Engineering and Science for Safety and Environmental Problem) 8th-11th Dec. 2020, Kobe, Japan.
  2. K. Nagai, K. Nagato, T. Okamura, M. Tomizawa, M. Nakao, “Distribution of Relaxation Times Analysis of SOFCs with Low Tortuosity Structure Anode.” The Electrochemical Society (ECS) PRiME 2020, Virtual conference, October, 2020.
  3. M. Tomizawa, K. Nagato, K. Nagai, & M. Nakao. “Distribution of relaxation time analysis of cathode micro-patterned PEFC.” The Electrochemical Society (ECS) PRiME 2020, Virtual conference, October, 2020.
  4. M. Tomizawa, K. Nagato, M. Nakao, “Distribution of Relaxation Time Analysis of Cathode Micro-Patterned PEFC”, PRiME2020 (ECS, ECSJ, & KECS Joint Meeting) (Fuel Cells, Electrolyzers, and Energy Conversion), Honolulu, Oct. 4-9, 2020.
  5. Keisuke Nagato, Toshiyuki Iseki, Kimihiro Tomiyama, Genki Nishikawa, “Seizure-resistance cast-iron surface textured by laser decomposition of graphite phase and hardened by laser quenching”, CIRP General Assembly, Online, Aug. 23-29, 2020.
  6. Kizaki, T., Hao, Y., Ohashi, T., Kokubo, T., & Nishijima, T. Capability of a grinding wheel reinforced in hoop direction with carbon fiber. CIRP General Assembly, Online, August 2020.
  7. Toru Kizaki, Masatoshi Iwama, Masaru Shiraishi, Naohiko Sugita, “Development of a machining center structure made of carbon fiber reinforced plastic and aluminum honeycomb”, LEMP2020, Cincinnati, OH, USA, June 22 – 26, 2020. (The conference was canceled due to COVID-19)
  1. Z. Fang*, K. Nagato, N. Sugita, M. Nakao, 2019. “Influence of tool coating condition on side milling of amorphous laminated composite block”, 2nd CIRP Conference on Composite Material Parts Manufacturing, 10th to 11th October 2019, AMRC Sheffield, UK.
  2. N. Tateyama, K. Ueda, M. Nakao, “Active sensing system for measuring distress level using mood induction music.” IEEE 8th International Conference on Informatics, Electronics & Vision (ICIEV) and 3rd International Conference on Imaging, Vision & Pattern Recognition (icIVPR), Washington, U.S.A., May-June, 2019. doi:10.1109/ICIEV.2019.8858574.
  3. K. Ueda, & M. Nakao, “Neural bases of creative thinking.” The 10th International Conference on Applied Human Factors and Ergonomics (AHFE), Washington D.C., USA, July, 2019.
  4. K. Koizumi, K. Ueda, Z. Li, N. Tateyama M. Nakao, “The effects of neuromodulation on creative thinking”, The 10th International Conference on Applied Human Factors and Ergonomics (AHFE), Washington D.C., USA, July, 2019.
  5. N. Tateyama, K. Ueda, M. Nakao, “Development of an active sensing system for distress detection using skin conductance response.”, IEEE 8th International Conference on Affective Computing and Intelligent Interaction (ACII), Cambridge, United Kingdom, September, 2019. doi: 10.1109/ACII.2019.8925442.
  6. K. Ueda, Y. Sakai, H. Yanagisawa, “Quantitative evaluation of sense of discrepancy to operation response using event-related potential”, International Conference on Design and Concurrent Engineering 2019 & Manufacturing Systems Conference, Sendai, Japan, September, 2019.
  7. K. Koizumi, K. Ueda, M. Nakao, “EEG source analysis of visual motion imagery for application to brain-computer interface”, The 8th Graz BCI Conference (GBCIC), Graz, Austria, September, 2019. doi: 10.3217/978-3-85125-682-6-22.
  8. S. Takada, K. Ueda, N. Yamada, Y. Iguchi, Y. Tao, K. Koizumi, M. Nakao, “Evaluation of Driver’s Cognitive Load when Presented Information on the Windshield using P300 Latency in Eye-fixation Related Potentials”, 2019 IEEE Intelligent Transportation Systems Conference (ITSC), Auckland, New Zealand, November, 2019, pp. 4006-4011, doi: 10.1109/ITSC.2019.8917209.
  9. R. Hitsuyu, K. Ueda, M. Nakao, T. Noda, “Development of a task-combined EEG-based neurofeedback system to enhance response inhibition”, The Real-Time Functional Imaging and Neurofeedback conference 2019 (rtFIN2019), Maastricht, the Netherlands, December, 2019
  10. Yusuke Ikemoto, Toru Kizaki, Liming Shu, Keigo Sekine, Masashi Ochi, Toshifumi Katsuma, Naohiko Sugita, “Thermal Simulation for evaluation of cooling efficiency in continuous generating gear grinding”, ASPEN2019, Shimane, 12-15 Oct. 2019.
  11. Kizaki, T., Katsuma, T., Ochi, M., & Fukui, R. Direct observation and analysis of heat generation at the grit-workpiece interaction zone in a continuous generating gear grinding. CIRP General Assembly, Birmingham UK, August 2019.
  12. Hiroyuki Karasawa, Takehito Yoshida, Rui Fukui, Toru Kizaki, Kohei Fujii, Shin’ichi Warisawa, “Analysis of Chip Shape Distribution Using Image Processing Technology to Estimate Wearing Condition of Gear Grinding Wheel”, The 52nd CIRP Conference on Manufacturing Systems (CIRP-CMS), 2019.
  1. K. Nagato, S. Yoshino, T. Shimura, M. Nakao, N. Shikazono, “Magnetic alignment of LSM particles in SOFC cathode”, 13th European SOFC & SOE Forum (EFCF), B0804, 5(3-6) July, 2018, Lucerne, Switzerland.
  2. Yuta Taira, Keisuke Nagato, Masayuki Nakao, “Real-Time Observation of Selective Laser Melting of WC-Co Cemented Carbide”, American Society for Precision Engineering (ASPE) and euspen Summer Topical Meeting; Advancing Precision in Additive Manufacturing, 25(22-25) Jul. 2018, Berkeley, CA, USA, 265-268.
  3. K. Nagato, T. Yamaguchi, M. Nakao, “Anchoring and chemical-bonding effects of anodic alumina microstructure on adhesion strength”, CIRP General Assembly, 22(19-25), August, 2018, Tokyo, Japan. (S-9)
  4. Z. Fang, T. Shimura, K. Nagato, M. Nakao, “Influence of temperature on mechanical characteristics and microstructure of iron-based amorphous in cold tensile test,” 12th International Conference on Advanced Computational Engineering and Experimenting ACE-X 2018, Amsterdam, Netherland, 2018/7/1-7/5.
  5. T. Higashisaka, K. Nagato, E. Tanaka, H. Watanabe, M. Nakao, “Small and sensitive force sensor based on contact resistance”, Micro Nano Engineering (MNE), 25(24-27) Sep, 2018, Copenhagen, PO-01-326.
  6. K. Ogata, K. Nagato, Y. Ito, H. Nakano, T. Hamaguchi, I. Saito, T. Fujiwara, T. Nagata, Y. Ito, M. Nakao, “Real-time observation of progressing crack and stress analysis in glass laser cutting”, Micro Nano Engineering (MNE), 25(24-27) Sep, 2018, Copenhagen, PO-01-282.
  7. N. Munehiro, K. Nagato, T. Higashisaka, M. Murakami M. Nakao, “Heat-assisted screen printing of high-aspect-ratio microstructure”, Micro Nano Engineering (MNE), 25(24-27) Sep, 2018, Copenhagen, PO-01-272
  8. Y. Taira, K. Nagato, M. Tomizawa, M. Nakao, “Effect of laser scan speed on cracks of WC-Co cemented carbides in selective laser melting”, Micro Nano Engineering (MNE), 26(24-27) Sep, 2018, Copenhagen, PO-02-201.
  9. T. Shimura, K. Nagato, Z. Fang, M. Nakao, “Experimental study of micro-clearance blanking process of thin metal sheet”, Micro Nano Engineering (MNE), 26(24-27) Sep, 2018, Copenhagen, PO-02-279.
  10. M. Tomizawa, K. Nagato, Y. Taira, T. Higashisaka, N. Takahashi, M. Nakao, “Centrifugal molding of carbon microstructure”, Micro Nano Engineering (MNE), 26(24-27) Sep, 2018, Copenhagen, PO-02-207.
  11. N. Takahashi, K. Nagato, E. Shimizu, T. Higashisaka, M. Tomizawa, M. Nakao, “Modelling of dross flow in laser cutting process of aluminum foil using particle method”, Micro Nano Engineering (MNE), 26(24-27) Sep, 2018, Copenhagen, PO-02-273.
  12. N. Takahashi, K. Nagato, E. Shimizu, H. Tendo, M. Nakao, “Heat Conduction and Pressure Distribution in Microstructured Mold for Laser Assisted Imprinting”, The 5th Asian Symposium on Materials and Processing (ASMP), 7(7-8) Dec, 2018, Bangkok, 94-95.
  13. E. Shimizu, K. Nagato, N. Takahashi, M. Nakao, “Effect of Scale of Microstructures on Polymer Deformation during Laser-Assisted Thermal Imprinting”, The 5th Asian Symposium on Materials and Processing (ASMP), 7(7-8) Dec, 2018, Bangkok, 98-99.
  14. Y. Taira, K. Nagato, M. Nakao, “Real-time Observation of Selective Laser Melting of Stainless Steel”, The 5th Asian Symposium on Materials and Processing (ASMP), 7(7-8) Dec, 2018, Bangkok, 122-123.
  15. Z. Fang*, K. Nagato, N. Sugita, M. Nakao, “New observation on the chip formation in two-dimensional cutting of iron-based amorphous foil”, 17th International Conference on Precision Engineering. 2018, Kamakura, Japan.
  16. K. Koizumi, K. Ueda, M. Nakao, “Development of Cognitive Brain-Machine Interface Based on Visual Imagery”, The 7th International BCI Meeting, 1-C-19, Pacific Grove, CA, USA, May, 2018.
  17. K. Koizumi, K. Ueda, M. Nakao, “Development of a Cognitive Brain-Machine Interface Based on a Visual Imagery Method”, The 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), ThBT1.2, Honolulu, HI, USA, July, 2018. doi: 10.1109/EMBC.2018.8512520.
  18. N. Tateyama, K. Ueda, M. Nakao, K. Nishi, “Development of Brain-Machine Interface Using Optical Illusion”, The 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), WePoS-25.7, Honolulu, HI, USA, July, 2018.
  19. K. Ueda, “A neural model of aesthetic preference for product appearance”, The 9th International Conference on Applied Human Factors and Ergonomics (AHFE), Florida, USA, July, 2018.
  20. Zongwei Ren, Zhenglong Fang, Go Kobayashi, Toru Kizaki, Tsukasa Nishikawa, Junshi Kugo, Eiji Nabata, Naohiko Sugita, “The influence of tool eccentric error on the surface roughness of gear teeth in power skiving”, 17th International Conference on Precision Engineering (ICPE), Japan, November 12 – 16 2018.
  21. Toru Kizaki, Tatsuya Fujii, Masatoshi Iwama, Masaru Shiraishi, Naohiko Sugita, Sung-Hoon Ahn, “Design of a CFRP-elastomer composite with high stiffness and damping capability”, CIRP General Assembly, August 2018.
  22. Toru Kizaki, Tatsuya Fujii, Masatoshi Iwama, Naohiko Sugita, “Design Method of CFRP-Elastomer Composite for Structure of Machine Tools”, International Manufacturing Science & Engineering Conference (MSEC) 2018, USA, June 18 – 22 2018, Poster
  1. K. Nagato, Y. Yajima, M. Nakao, “Heat conduction and polymer flow in microstructured mold for laser-assisted imprinting”, Digest of the 61st international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), May 31 (May30-Jun2), 2017, Orlando, USA.
  2. K. Nagato, K. Shintani, N. Shikazono, T. Shimura, M. Nakao, “Effect of YSZ Volume on Polarization Resistance of Anode with Magnetically Aligned YSZ”, ECS Trans. 78(2017)1489-1494, SOFC-XV, July 28 (23-28), 2017, Hollywood, FL, USA.
  3. Keisuke Nagato, Kodai Shintani, Masayuki Nakao, “Real-time detection of microcracks with floating giant-magnetoresistance sensor in twin-disk sliding tests”, CIRP General Assembly, 23(21-24), August, 2017, Lugano, Switzerland.
  4. Y. Ito, R. Shinomoto, A. Otsu, K. Nagato, K. Tatsukoshi, Y. Fukasawa, T. Kizaki, N. Sugita, M. Mitsuishi, “Investigation of damage generation during femtosecond laser frilling of glass”, International Conference on Laser Ablation (COLA), 6(3-8) Sep, 2017, Marseille, France.
  5. A. Sakai, K. Nagato, M. Nakao, “Infiltration of YSZ nanoparticles into microholes by centrifugation”, Micro Nano Engineering (MNE), 19(18-22) Sep, 2017, Braga, Portugal.
  6. Y. Taira, K. Nagato, A. Sakai, H. Nakano, M. Nakao, “Effect of oxygen and scan speed on selective laser melting of aluminum powder”, Micro Nano Engineering (MNE), 19(18-22) Sep, 2017, Braga, Portugal.
  7. E. Shimizu, K. Nagato, H. Nakano, Y. Yajima, M. Nakao, “Numerical analysis of resin flow in laser-assisted imprinting of various-sized microstructures by MPS method”, Micro Nano Engineering (MNE), 20(18-22) Sep, 2017, Braga, Portugal.
  8. M, Murakami, K. Nagato, T. Oshima, S. Washino, E. Tanaka, S. Takagi, T. Matsushima, M. Nakao, “Microscopic observation of collapse behavior of clusters in magnetorheological fluid (MRF) clutch”, Micro Nano Engineering (MNE), 20(18-22) Sep, 2017, Braga, Portugal.
  9. Q. Ding, K. Nagato, H. Nakano, Y. Yajima, M. Nakao, “Elucidation of slurry behavior in tip part near intersection of squeegee and substrate in screen printing”, Micro Nano Engineering (MNE), 20(18-22) Sep, 2017, Braga, Portugal.
  10. H. Nakano, K. Nagato, Q. Ding, T. Hamaguchi, I. Saito, T. Fujiwara, T. Nagata, Y. Ito, M. Nakao, “Real-time observation of crack propagation in laser cutting of glass”, Micro Nano Engineering (MNE), 20(18-22) Sep, 2017, Braga, Portugal.
  11. T. Higashisaka, K. Nagato, M. Murakami, H. Watanabe, E. Tanaka, M. Nakao, “Sensitive force sensor using contact resistance in oil environment”, Micro Nano Engineering (MNE), 20(18-22) Sep, 2017, Braga, Portugal.
  12. S. Yoshino, K. Nagato, T. Yamaguchi, A. Sakai, M. Nakao, “Microstructure-control of porous material in solid oxide fuel cells by magnetic field alignment method”, Micro Nano Engineering (MNE), 20(18-22) Sep, 2017, Braga, Portugal.
  13. Yusuke Ito, Rin Shinomoto, Akinori Otsu, Keisuke Nagato, Kentaro Tatsukoshi, Yasuji Fukasawa, Toru Kizaki, Naohiko Sugita, Mamoru Mitsuishi, “Investigation of damage generation during femtosecond laser drilling of glass”, COLA 2017, France, September 3-8 2017, Poster.
  14. Naohiko Sugita, Liming Shu, Takehiro Shimada, Masaya Oshima, Toru Kizaki, Mamoru Mitsuishi, “Novel surgical machining via an impact cutting method based on fracture analysis with a discontinuum bone model”, CIRP General Assembly, August 2017.
  1. K. Nagato, “Laser-Assisted Replication of Microstructured Film”, EMN Meeting on Polymer, Jan. 14, 2016 Hong Kong, China. (Invited)
  2. Takumu Yamaguchi, Keisuke Nagato, Shinichi Hasegawa, Tatsuya Mimura, Kohei Kusaka, Masayuki Nakao, “Porous Structure on Anodic Alumina Surface for Improvement of Adhesion Strength”, Adhesion Society, Feb. 23, 2016 San Antonio, USA.
  3. K. Nagato, “Fabrication of electrode microstructures of solid oxide fuel cells”, EMN Nanotechnology, Apr. 3 2016, Dubai, UAE. (Invited)
  4. K. Nagato, Y. Fujiwara, A. Sakai, M. Nakao, “Sharp-edged Templates for Imprinting of Ceramic Green Sheets”, Proceedings of the 11th IEEE Annual International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), Matsushima Bay and Sendai MEMS City, Japan, 17-20 Apr. 2016
  5. Y. Yajima, K. Nagato, M. Nakao, “Replication of Nanostructures on Polyethylene Terephthalate with Laser-Assisted Roller Nanoimprinting”, Digest of the 60th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Jun 2 (May31-Jun3), 2016, Pittsburgh, USA.
  6. K. Nagato, L. Wang, T. Shimura, M. Nakao, N. Shikazono, “Anode with Ni-YSZ Nanostructures Infiltrated into YSZ Pillars”, 12th European SOFC & SOE Forum (EFCF), B0303, 6(5-8) July, 2016, Lucerne, Switzerland.
  7. S. Shimura, K. Nagato, N. Shikazono, “Evaluation of SOFC anode polarization characteristics with pillar-based YSZ structure”, 12th European SOFC & SOE Forum (EFCF), B0303, 6,7(5-8) July, 2016, Lucerne, Switzerland.
  8. K. Nagato, S. Miyazaki, S. Yamada, M. Nakao, “Nano/microcomposite surface fabricated by chemical treatment/microembossing for control of bubbles in boiling heat transfer”, CIRP General Assembly, 22(21-24), August, 2016, Guimaraes, Portugal.
  9. K. Nagato, “Control of anode microstructure toward high-efficiency specie-transfer and chemical reaction”, Asian SOFC conference, Sep. 6 2016, Institute of Industrial Science, The University of Tokyo, Japan. (Invited)
  10. Q. Ding, K. Nagato, Y. Yajima, M. Nakao, “Observation of slurry behavior in ink reservoir of screen printing”, International Symposium on Micro-Nano Science and Technology 2016, Hongo Campus, The University of Tokyo, 17th Dec. 2016.
  11. A. Sakai, K. Nagato, T. Yamaguchi, S. Yoshino, M. Nakao, “Molding of YSZ pillars by screen printing for anode of SOFC”, International Symposium on Micro-Nano Science and Technology 2016, Hongo Campus, The University of Tokyo, 17th(16-18) Dec. 2016.
  12. S. Yoshino, K. Nagato, T. Yamaguchi, A. Sakai, M. Nakao, “LSM/YSZ cathode aligned by magnetic field for solid oxide fuel cell”, International Symposium on Micro-Nano Science and Technology 2016, Hongo Campus, The University of Tokyo, 18th(16-18) Dec. 2016.
  13. Shu, L., Sugita, N., Shimada, T., Yamamoto, K., Kizaki, T., Mitsuishi, M., “Design and Experimental Analysis of Step Drills Aiming Orthopedic Surgery”, 31th ASPE Annual Meeting, USA, November 2016, Poster
  14. Toru Kizaki, Yusuke Ito., Shota Tanabe, Yangjin Kim, Naohiko Sugita, Mamoru Mitsuishi, “Laser-assisted machining of zirconia ceramics using a diamond bur,” 18th CIRP Conference on Electro Physical and Chemical Machining (ISEM XVIII), 497 – 502, Tokyo, Japan, April 2016.
  1. Takuya Oshima, Keisuke Nagato, Akinori Kuwayama, Hiroshi Okada, Takashi Matsushima, Shu Takagi, Masayuki Nakao, Tetsuya Hamaguchi, “In-situ observation of behavior of magnetic particle clusters during torque transfer between textured magnetic poles”, IEEE International Magnetic Conference, Beijing, China, May 13(11-15), 2015, DG-06.
  2. K. Nagato, M. Oike, Y. Kimura, T. Kakinuma, M. Nakao, “Injection-Compression Molding of Nanostructures for Three-Dimensional Cell-Culturing”, Digest of the 59th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), San Diego, USA, May 27 (May26-29), 2015.
  3. K. Nagato, L. Wang, S. Iwasaki, T. Hamaguchi, M. Nakao, “Metallic Nanostructures Controlled by Dewetting Thin Film on Patterned Ceramic Surface”, Digest of the 59th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), San Diego, USA, May 27 (May26-29), 2015.
  4. J. Wang, K. Nagato, K. Takahashi, T. Hamaguchi, M. Nakao, “Damascene of metallic wires on imprinted flexible substrate”, Digest of the 59th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), San Diego, USA, May 27 (May26-29), 2015.
  5. Keisuke Nagato, “Replication of large-area nanostructures for optical devices”, EMN Cancun Meeting (Energy Materials Nanotechnology), June 10(8-11), 2015, Cancun, Mexico (Invited).
  6. Keisuke Nagato, “Microstructure-controlled fabrication on electrodes of solid oxide fuel cells”, EMN Qingdao Meeting (Energy Materials Nanotechnology), June 16(14-17), 2015, Qingdao, China (Invited).
  7. Yuki Yajima, Keisuke Nagato, Kohei Hisada, Shuhei Ogura, M. Nakao, “Modelling of Laser Welding Process Using Particle Method”, The 68th IIW International Conference High-Strength Materials – Challenges and Applications, July 3rd (June 28th – July 3rd), 2015, Helsinki, Finland.
  8. A. G. Remnev, K. Uemura, K. Nagato, “Influence of reactive gas additives on surface morphology evolution of stainless steel substrates undergoing Ar ion sputtering process”, The 13th International Symposium on Sputtering & Plasma Processes, SP3-9p, 10 (8-10) July, 2015, Kyoto Research Park, Kyoto, Japan.
  9. K. Nagato, S. Shinagawa, N. Shikazono, S. Iwasaki, M. Nakao, “SOFC Anode Based on YSZ Pillars”, ECS Trans. 68(2015)1309-1314, SOFC-XIV, July 30 (26-31), 2015, Glasgow, UK.
  10. K. Nagato, Y. Yajima, K. Takahashi, T. Hamaguchi, M. Nakao, “Replication of antireflection structure for solar cells by laser-assisted imprinting”, Asian Symposium on Materials and Processing (ASMP), Aug. 11, 2015, Lombok, Indonesia.
  11. Yuki Hirata, Yuya Nakahara, Keisuke Nagato, Takahisa Kato, Junho Choi, “Amorphous Carbon Film as a Mold Release Layer for Nanoimprint Lithography”, International Tribology Conference, Sep 16-20, 2015, Tokyo.
  12. M. Nakao, K. Takahashi, K. Nagato, K. Iino, “Momentary Local Laser Heating in Thermal Roll-to-Plate Nanoimprinting; Node Decoupling with Axiomatic Design”, Proc. Of 9th International Conference on Axiomatic Design (ICAD2015), vol. 34 (2015) 212-216.　Florence, 16-18 Sep. 2015. doi:10.1016/j.procir.2015.07.001 (Outstanding Technical Paper Award)
  13. K. Hishiki, K. Nagato, K. Takahashi, T. Hamaguchi, M. Nakao, “Real-Time measurement of replication degree in thermal roller nanoimprinting”, Micro Nano Engineering (MNE), Sep. 23, 2015, Hague, Holland.
  14. Y. Yajima, K. Nagato, K. Takahashi, T. Hamaguchi, M. Nakao, “Effect of Pressing Pressure on Filling Ratio of Microstructures by Laser-Assisted Imprinting”, Micro Nano Engineering(MNE), Sep. 23, 2015, Hague, Holland.
  15. S. Yamada, K. Nagato, S. Miyazaki, N. Shikazono, M. Nakao, “High-heat-transfer boiling surface with the combination of boehmite treatment and imprinting”, Micro Nano Engineering(MNE), Sep. 23, 2015, Hague, Holland.
  16. K. Nagato, “Laser-Assisted Imprinting of Microstructured Polymer Films”, World Expo on Materials Science –Polymer Engineering, Nov. 28, 2015, Dubai, UAE. (Invited)
  17. Yusuke Ito, Toru Kizaki, Naohiko Sugita, Mamoru Mitsuishi, “Numerical Modeling of Picosecond Laser Drilling of Glass,” Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Kyoto Japan, October 2015.
  18. Yusuke Ito, Toru Kizaki, Tatsuya Fujii, Yuki Yuasa, Naohiko Sugita, Mamoru Mitsuishi, “Precision Machining of Yttria-stabilized Tetragonal Zirconia Polycrystal by High-speed Milling,” 30th ASPE Annual Meeting, 561 – 566, Austin Texas USA, November 2015, Poster.
  1. S. Iwasaki, K. Nagato, L. Wang, Y. Li, J.-J. Delaunay, and M. Nakao, “Morphology Control of Anodic Porous Alumina Using Nanoimprinting”, Digest of the 58th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Washington DC, USA, May 28 (May27-30), 2014.
  2. S. Miyazaki, K. Nagato, Y. Watanabe, K. Takahashi, N. Shikazono, and M. Nakao, “High-Heat-Transfer Boiling Surface with Micropattern Replicated by Nanoimprinting”, Digest of the 58th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Washington DC, USA, May 28 (May27-30), 2014.
  3. K. Takahashi, K Nagato, J. Wang, T. Hamaguchi, and M. Nakao, “High-Speed and Low-Energy-Consumption Replication of Nanostructures with Laser-Assisted Roller Nanoimprinting”, Digest of the 58th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Washington DC, USA, May 30 (May27-30), 2014. (Invited)
  4. K. Nagato, N. Shikazono, M. Nakao, J. Hayd, D. Klotz, E. Ivers-Tiffée, “Parameter Identification on Polarization on Polarization Resistance of SOFC Anode with Magnetically Aligned Ni”, 11th European SOFC & SOE Forum, Lucerne, Switzerland 2 (1-4) July 2014.
  5. K. Nagato, K. Mitamura, S. Shinagawa, and M. Nakao, “Real-Time Observation of Paste during Mico-Via Filling in Screen Printing”, The 5th International Conference on Nanomanufacturing (nanoMan2014), Bremen, Germany, 8 (8-10) July 2014. (Keynote)
  6. K. Shintani, K. Nagato, R. Fukui, M. Nakao, K. Kusaka, “Adhesively-Bonded Joint for Aluminum Pipe Frame Structures and Mechanical Properties”, 5th World Congress on Adhesion and Related Phenomena (WCARP-V), p.37, Nara, Japan, 8 (7-11) Sep 2014.
  7. K. Takahashi, K. Nagato, T. Hamaguchi, M. Nakao, “High-Speed Replication of Light-Extraction Structure with Thermal Roller Nanoimprinting”, 40th Micro and Nano Engineering (MNE) 2014, Lausanne, Switzerland, Sep 25(22-26) 2014.
  8. J. Wang, K. Nagato, K. Takahashi, T. Hamaguchi, M. Nakao, “Novel Patterning of Metal Trace on Flexible Substrate by Nanoimprinting and Screen Printing”, 40th Micro and Nano Engineering (MNE) 2014, Lausanne, Switzerland, Sep 25(22-26) 2014.
  9. L. Wang, K. Nagato, S. Iwasaki, T. Hamaguchi, M. Nakao, “Through-hole membrane with anodic-alumina nanohole array”, 40th Micro and Nano Engineering (MNE) 2014, Lausanne, Switzerland, Sep 23(22-26) 2014.
  10. K. Nagato, K. Takahashi, M. Nakao, “Thermal Roller Nanoimprinting –Multilayered Structures, Laser-Assisted Replication–”, 14th International Conference on Nanoimprint and Nanoprint Technology (NNT 2014), Oct 23(22-24), 2014, ANA Crowne Plaza Kyoto, Kyoto, Japan.
  11. Takuya Oshima, Keisuke Nagato, Akinori Kuwayama, Hiroshi Okada, Takashi Matsushima, Shu Takagi, Masayuki Nakao, Tetsuya Hamaguchi, “Microscopic observation of behavior of magnetic particle clusters during torque transfer between magnetic poles”, 59th Annual Magnetism & Magnetic Materials Conference, Honolulu, Hawaii, Nov. 7(3-7), 2014
  12. K. Nagato, K. Takahashi, M. Nakao, “Laser-Assisted Replication of Large-Area Nanostructures and Antireflection Structure”, Asian Workshop on Polymer Processing (AWPP) 2014, Nov. 18 (17-20), 2014, Kenting, Taiwan.
  13. Toru Kizaki, Kanako Harada, Mamoru Mitsuishi, “Efficient and precise cutting of zirconia ceramics using heated cutting tool,” CIRP General Assembly, Nantes, France, August 2014.
  14. Toru Kizaki, Takafumi Kitaguchi, Naohiko Sugita, Mamoru Mitsuishi, “Effect of machining parameters on precision machining of zirconia ceramics using heated cutting tools,” Proceedings of the 14th euspen International Conference, 77–80, Dubrovnik Croatia, June 2014.
  1. Omar Alghurair, Alexey Remnev, Keisuke Nagato, [70] Shota Ikeshima, Yasunori Ono, Kensuke Uemura, Masayuki Nakao, “Investigation of Insertion Phenomena with Needles Treated by Plasma Etching”, The First CIRP Conference on Bio manufacturing, 4-6 Mar. 2013, The University of Tokyo, Tokyo. (Oral presentation) (In: Procedia CIRP 5 (2013) 53-56)
  2. Keisuke Nagato, Naoki Shikazono, André Weber, Dino Klotz, Masayuki Nakao, and Ellen Ivers-Tiffée, “SOFC Anode Fabricated by Magnetically Aligning of Ni Particles”, ECS Transasctions, 57 (2013) 1307-1311. SOFC Symposium, 7-11 (9, OA-31) Oct. 2013. (Oral presentation)
  3. Ken Takahashi, Keisuke Nagato, Toshimi Sato, Daisuke Suehiro, Tetsuya Hamaguchi, Masayuki Nakao, “Laser-assisted roller imprinting of nanostructures with real-time monitoring of replication degree”, American Society for Precision Engineering (ASPE) Annual Meeting 2013, 20-25(22,23) Oct 2013, St. Paul, Minnesota, USA (poster presentation).
  4. Takuma Yamauchi, Shota Ikeshima, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, “Continuous and fast manufacturing technique of ion-conducting ceramic compacts with oriented anisotropic particle”, American Society for Precision Engineering (ASPE) Annual Meeting 2013, 20-25(22,23) Oct 2013, St. Paul, Minnesota, USA (poster presentation).
  5. Shunta Shinagawa, Keisuke Nagato, Naoki Shikazono, Tetsuya Hamaguchi, Masayuki Nakao, “Orientation-controlled microfabrication of anode of solid oxide fuel cells”, American Society for Precision Engineering (ASPE) Annual Meeting 2013, Vol. 56, 243-246. 20-25(22,23) Oct 2013, St. Paul, Minnesota, USA (poster presentation).
  6. Yusuke Ito, Toru Kizaki, Naohiko Sugita, Mamoru Mitsuishi, “Laser-assisted Precision Machining of Yttria-stabilized Tetragonal Zirconia Polycrystals with Optimal Wavelength,” The 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), 226-230, Matsushima Japan, November 2013.
  1. K. Nagato, T. Sato, T. Hamaguchi, M. Nakao, “Effect of offset temperature on replication of laser-assisted imprinting”, Digest of the 56th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Waikoloa, Hawaii, USA, May 30 (May29-Jun1), 2012. (Poster presentation)
  2. K. Nagato, T. Hamaguchi, M. Nakao, “Injection compression molding of replica molds for nanoimprint lithography”, Digest of the 56th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Waikoloa, Hawaii, USA, May 30 (May29-Jun1), 2012. (Poster presentation)
  3. T. Sato, K. Nagato, J. Choi, T. Hamaguchi, M. Nakao, “Laser-scanning imprinting for large-area nanostructures”, Digest of the 56th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), Waikoloa, Hawaii, USA, May 30 (May29-Jun1), 2012. (Invited Poster)
  4. Remnev Alexey, Shalnov Konstantin, Uemura Kensuke, Keisuke Nagato, “Efffect of Plasma Properties and Set-Up Geometry on Medical Needles Finishing with Ion Plasma Sputtering Method”, 4th International Symposium on Advanced Plasma Science and its Applications for Nitrides and Nanomaterials (ISPlasma2012), Chuo University, 4-8 March 2012.
  5. Keisuke Nagato, Daisuke Suehiro, Toshimi Sato, Shota Ikeshima, Yasuaki Watanabe, Masayuki Nakao, “Roller Replication of Nano-/Microstructures of Polymers, Glasses, Metals, and Ceramics”, The 3rd International Conference on Nanomanufacturing (nanoMan2012), 25-27(26) July 2012, Saitama, Japan (Oral presentation)  Won Excellent Young Researcher Award
  6. Yasuyuki Watanabe, Keisuke Nagato, Naoki Shikazono, Tetsuya Hamaguchi, Masayuki Nakao, “Improvement of heat transfer coefficient of boiling surface on nanostructured metal using nanoimprinting”, Proceedings of the 26th American Society for Precision Engineering (ASPE) Annual Meeting, San Diego, CA, USA, Oct 24(21-26), 2012, 46-49 (Oral presentation)
  7. Shota Ikeshima, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, “Orienattion control of anisotropic particle by shear force”, Proceedings of the 26th American Society for Precision Engineering (ASPE) Annual Meeting, San Diego, CA, USA, Oct 23(21-26), 2012, 316-319 (Poster presentation)
  8. Takuma Yamauchi, Keisuke Nagato, Shota Ikeshima, Tetsuya Hamaguchi, Masayuki Nakao, “Micromixer of multi-material slurry with rotation-split-combination cycle for ceramic components”, Proceedings of the 26th American Society for Precision Engineering (ASPE) Annual Meeting, San Diego, CA, USA, Oct 23(21-26), 2012, 359-362 (Poster presentation)
  9. Shunta Shinagawa, Keisuke Nagato, Naoki Shikazono, Tetsuya Hamaguchi, Masayuki Nakao, “Enhancement of power efficiency of solid oxide fuel cells by aligning microstructure path of ion/electron/gas in anode”, Proceedings of the 26th American Society for Precision Engineering (ASPE) Annual Meeting, San Diego, CA, USA, Oct 23(21-26), 2012, 343-346 (Poster presentation)
  10. Keisuke Nagato, [70] Ryunosuke Fujisawa, Daisuke Suehiro, M. Kikuta, Tetsuya Hamaguchi, Masayuki Nakao, “Antireflection structure fabricated by changing Fe2O3 nanowires to Fe3O4 nanocones”, Digest of 38th International Conference on Micro and Nano Engineering (MNE), 16-20 Sep. 2012, Toulouse, France. (Oral presentation)
  11. Keisuke Nagato, Ryota Nakabayashi, Tetsuya Hamaguchi, Masayuki Nakao, “High-speed shearing of multilayered light-waveguide”, Digest of 38th International Conference on Micro and Nano Engineering (MNE), 16-20 Sep. 2012, Toulouse, France. (Poster presentation)
  12. Toru Kizaki, Toshihiro Ogasahara, Takuro Kudo, Naohiko Sugita, Mamoru Mitsuishi, “Laser-assisted machining of yttria-stabilized tetragonal zirconia polycrystals using UV laser,” Proceedings of the 1st international conference on design and processes for medical devices (PROMED), 115–118, Brescia Italy, May 2-4, 2012
  1. K. Nagato, R. Nakajima, Y. Kawamoto, Y. Ohta, H. Shichino, M. Nakao, T. Hamaguchi, “Investigation of boundary lubricating films developing on gear material under high-pressure twin disk test”, Digest of International Tribology Conference (ITC), P06-01, 30 Oct -3 Nov (2 Nov), 2011, Hiroshima, Japan.
  2. M. Shimoda, K. Nagato, T. Hamaguchi, M. Nakao, “Photolithography with periodic multilayered resist film for photonic crystals”, Digest of the 24th International Microprocess and Nanotechnology Conference (MNC), 26P-7-74, 24-27 (26) Oct. 2011, Kyoto, Japan.
  3. Toshimi Sato, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, “Laser-scanning imprinting for large-area nanostructures”, Digest of 37th International Conference on Micro and Nano Engineering (MNE), Berlin, Germany, 19-23 (22) Sep. 2011.  Won the best poster award.
  4. Kaname Sekiya, Keisuke Nagato, Tetsuya Hamaguchi, Masayuki Nakao, “Morphology control of nickel oxide nanowires”, Digest of 37th International Conference on Micro and Nano Engineering (MNE) , Berlin, Germany, 19-23 (22) Sep. 2011.
  5. Shu Wakabayashi, Yasuhiro Kawamoto, Keisuke Nagato, Shinichi Mutou, Masayuki Nakao, Tetsuya Hamaguchi, “Investigation of excavation behavior with model experiment and distinct element method (DEM) simulation using irregularly shaped particles”, Proceedings of the 17th International Conference of the International Society for Terrain-Vehicle Systems (ISTVS), Blacksburg, VA, USA, Sep. 18-22 (22), 2011.
  6. Daisuke Suehiro, Keisuke Nagato, Tetsuya Hamaguchi, M. Nakao, “Fabrication of antireflection structure by simple annealing of Fe film”, Proceedings of the 11th IEEE International Conference on Nanotechnology (IEEE NANO), 588-591, Aug 15-18, 2011, Portland, Oregon, USA.
  7. Toshimi Sato, Keisuke Nagato, Junho Choi, Tetsuya Hamaguchi, Masayuki Nakao, “Laser-Assisted Imprinting of Nanostructured Glass”, Proceedings of the 11th IEEE International Conference on Nanotechnology (IEEE NANO), 1-4, Aug 15-18, 2011, Portland, Oregon, USA. (Invited)
  8. K. Nagato, T. Hamaguchi, M. Nakao, “Copper oxide nanowire arrays synthesized from sputtered Cu thin film” Digest of the 55th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), P13-19, Las Vegas, NV, USA, 1 Jun (31May-3Jun), 2011.
  9. K. Nagato, T. Hamaguchi, M. Nakao, “Injection compression molding of high-aspect-ratio nanostructures”, Digest of the 55th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN), P13-27, Las Vegas, NV, USA, 1 Jun (31May-3Jun), 2011.
  1. N. Toyoda, T. Hirota, K. Nagato, H. Tani, Y. Sakane, T. Hamaguchi, M. Nakao, I. Yamada, “Planarization of bit patterned surface with gas cluster ion beams”, Digest of INTERMAG (International Magnetic Conference, IEEE Magnetic society), Sacramento, CA, USA, May 4-8, 2009, AC-07. (Oral presentation)
  2. S. Sugimoto, K. Nagato, T. Hamaguchi, M. Nakao, “Iterative roller imprint of multilayered nanostructures”, Digest of Micro- and Nano- Engineering (MNE), Ghent, Belgium, Sep 28-Oct 1, 2009. (Poster presentation)
  3. M. Furubayashi, K. Nagato, H. Moritani, T. Hamaguchi, M. Nakao, “Field emission properties of discretely synthesized tungsten oxide nanowires”, Digest of Micro- and Nano- Engineering (MNE), Ghent, Belgium, Sep 28-Oct 1, 2009. (Poster presentation)
  4. S. Hattori, K. Nagato, T. Hamaguchi, M. Nakao, “Rapid injection molding of high-aspect-ratio nanostructures”, Digest of Micro- and Nano- Engineering (MNE), Ghent, Belgium, Sep 28-Oct 1, 2009. (Poster presentation)
  1. K. Nagato, H. Tani, Y. Sakane, N. Toyoda, I. Yamada, M. Nakao, and T. Hamaguchi, “Study of Gas Cluster Ion Beam Planarization for Discrete Track Magnetic Disks”, Digest of INTERMAG (International Magnetic Conference, IEEE Magnetics Society), Madrid, Spain, May 4-8, 2008, p. 552 (DA-11). (Oral presentation)
  2. M. Nakao, K. Nagato, H. Suzuki, T. Nishino, H. Yonemoto, H. Kaito, T. Hamaguchi and K. Tsuchiya, “Sub-wavelength Pitched Cubic Mosaic Multi-layer Precisely Pressed by Nano-features Mold for Multi-functional Optical Elements”, Proceedings of the 41st CIRP Conference on Manufacturing Systems, The University of Tokyo, Japan, May 26-28, 2008, 449-452. (Oral presentation)
  3. H. Kaito, K. Nagato, K. Kasuya, K. Tsuchiya, H. Hamaguchi, M. Nakao, “Local Synthesis of Carbon Nanotubes by Electron Beam-Heating Chemical Vapor Deposition”, Proceedings of 23rd American Society for Precision Engineering (ASPE) Annual Meeting, Portland, OR, Oct. 19-24, 2008, pp. 522-525. (Poster presentation)
  4. H. Moritani, K. Nagato, Y. Kojima, M. Furubayashi, K. Kasuya, T. Hamaguchi, M. Nakao, “Multi-sectional Synthesis of Tungsten Oxide Nanowires Using Micropatterned Layer for Field-Emission Displays”, Proceedings of 23rd American Society for Precision Engineering (ASPE) Annual Meeting, Portland, OR, Oct. 19-24, 2008, pp. 514-517. (Poster presentation)
  5. J. Yanagimoto, K. Nagato, S. Sugiyama, “Ultrafine-grained steel by hot extrusion”, International Conference of Technology of Plasticity (ICTP), Kyeongju, Korea, Sep. 7-11, 2008. (Invited, oral presentation)
  6. N. Toyoda, K. Nagato, H. Tani, Y. Sakane, M. Nakao, T. Hamaguchi, I. Yamada, “Planarization of Amorphous Carbon Films on Patterned Media Using Gas Cluster Ion Beams”, Digest of 53rd Magnetism and Magnetic Materials Conference (MMM 2008), Austin, TX, Nov. 10-14, 2008. (Oral presentation)
  1. Y. Jin, K. Kasuya, K. Nagato, H. Morii, T. Ooi, M. Nakao, “Local Synthesis of Single-walled Carbon Nanotubes on Zeolite-covered Silicon Substrate by Laser-heating Chemical Vapor Deposition”, Proceedings of 2nd IEEE-NEMS (Nano- and Micro-Engineered and Molecular Systems), Bangkok, Thailand, Jan. 16-19, 2007, 462-466. (Oral presentation)
  2. Y. Kojima, K. Nagato, K. Kasuya, H. Moritani, M. Nakao, “Pinpoint Synthesis of Tungsten Oxide Nanowires using Heat Controlling Layer”, Proceedings of 22nd American Society for Precision Engineering (ASPE) Annual Meeting, Dallas, TX, Oct. 14-19, 2007, 105-108. (Oral presentation)
  3. K. Nagato, H. Hamaguchi, T. Ide, N. Ohno, K. Tsuchiya, M. Nakao, “Self-Unbalance-Correction Technique for Production of Precision High-Speed Rotors”, Proceedings of 22nd American Society for Precision Engineering (ASPE) Annual Meeting, Dallas, TX, Oct. 14-19, 2007, 453-456. (Poster presentation)
  4. S. Sugimoto, H. Morii, K. Nagato, K. Tsuchiya, T. Hamaguchi, M. Nakao, “Plasmon Resonance Enhanced Scanning Near-field Optical Microscope Probes for Single Fluorescent Molecule Observation”, Proceedings of 22nd American Society for Precision Engineering (ASPE) Annual Meeting, Dallas, TX, Oct. 14-19, 2007, 97-100. (Oral presentation)
  5. Y. Sugiue, H. Morii, K. Nagato, K. Tsuchiya, H. Hamaguchi, M. Nakao, “Photocatalytic Nano-imprinting Using Direct Near-field Oxidation”, Proceedings of 22nd American Society for Precision Engineering (ASPE) Annual Meeting, Dallas, TX, Oct. 14-19, 2007, 299-302. (Poster presentation)
  1. K. Nagato, T. Ooi, T. Kishimoto, H. Hachisu, H. Katori, M. Nakao, “Prototyping of Atomic Conveyer for Quantum Devices”, Proceedings of 20th American Society for Precision Engineering (ASPE) Annual Meeting, Norfolk, VA, Oct. 9-14, 2005, 106-109. (Oral presentation)
  2. K. Kasuya, Y. Jin, K. Nagato, T. Ooi, K. Tsuchiya, T. Hamaguchi, M. Nakao, “Pinpoint Synthesis of Carbon Nanotubes using Focused Beams”, Proceedings of 20th American Society for Precision Engineering (ASPE) Annual Meeting, Norfolk, VA, Oct. 9-14, 2005, 476-479. (Poster presentation)
  3. T. Kishimoto, H. Hachisu, J. Fujiki, K. Nagato, M. Yasuda, H. Katori, “Electrodynamic trapping of neutral strontium atoms”, Digest of 2005 European Quantum Electronics Conference, EQEC ’05, 1467-1468. (IQEC, International Quantum Electronics Conference), Munich, Germany, June 12-17, 2005. (Poster presentation)
  1. K. Nagato, Ohshige, T. Ooi, K. Tsuchiya, T. Hamaguchi, M. Nakao, “Fabrication of Atom Trap Chip for Quantum Information Processing”, Proceedings of 19th American Society for Precision Engineering (ASPE) Annual Meeting, Orland, FL, Oct. 24, 2004.
論文
解説等
国際会議
研究基金
Far far away, behind the word mountains, far from the countries Vokalia and Consonantia, there live the blind texts. Separated they live in Bookmarksgrove right at the coast
Far far away, behind the word mountains, far from the countries Vokalia and Consonantia, there live the blind texts. Separated they live in Bookmarksgrove right at the coast
Far far away, behind the word mountains, far from the countries Vokalia and Consonantia, there live the blind texts. Separated they live in Bookmarksgrove right at the coast

特任研究員・博士課程

学年 氏名 ふりがな ID
特任研究員
Liwei Chen
Liwei Chen
chen
特任研究員
小泉　光司
こいずみ こうじ
koizumi
D2
山田　和佳
やまだ　のどか
yamada.n
D1
田中　暉久
たなか　あきひさ
tanaka.a
D1
光田　健洋
みつだ　たけひろ
mitsuda
ソニーX東大X藝大の野心的セッション
東京大学 RACE 人工物工学研究センター 社会連携講座 「次世代ものづくりアーキテクチャ」
東京大学プラレーラーズ
ソニーX東大X藝大の野心的セッション
東京大学 RACE 人工物工学研究センター 社会連携講座 「次世代ものづくりアーキテクチャ」
東京大学プラレーラーズ
logo-n

長藤・木崎研究室

  • 東京大学大学院工学系研究科 機械工学専攻
  • 〒113-8656 東京都文京区本郷7-3-1　東京大学工学部2号館7階
Access
  • 教授室:   71D4号室 　　 TEL 03-5841-6361
  • 講師室:    71D3号室 　　 TEL 03-5841-6360
  • 学生居室:   71C2号室 　　 TEL 03-5841-6362
  • 実験室1：工学部8号館0066
  • 実験室2：工学部8号館0061

Nagato・Kizaki Laboratory

The University of Tokyo
Graduate School of Engineering, Department of Mechanical Engineering Faculty of Engineering,
Department of Mechanical Engineering

  • 7F, Engineering Bldg. 2, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo　Zip Code：113-8656
東京大学
東京大学 RACE 人工物工学研究センター 社会連携講座
CROCES
DX-GEM
logo-n

長藤・木崎研究室

Nagato・Kizaki Lab.

Department of Mechanical Engineering,The University of Tokyo

  • 東京大学大学院工学系研究科 機械工学専攻　長藤・木崎研究室
  • 〒113-8656 東京都文京区本郷7-3-1　東京大学工学部2号館7階
Access
  • 教授室:　　 71D4号室
  • 講師室:　　 71D3号室
  • 学生居室: 　71C2号室
  • 03-5841-6361
  • 03-5841-6360
  • 03-5841-6362

Nagato・Kizaki Laboratory

The University of Tokyo
Graduate School of Engineering, Department of Mechanical Engineering Faculty of Engineering,
Department of Mechanical Engineering

  • 7F, Engineering Bldg. 2, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo　Zip Code：113-8656
東京大学
東京大学 RACE 人工物工学研究センター 社会連携講座
CROCES
DX-GEM
logo-n

長藤・木崎研究室

Nagato・Kizaki Lab.

Department of Mechanical Engineering,
The University of Tokyo

  • 東京大学大学院工学系研究科 機械工学専攻
    長藤・木崎研究室
  • 〒113-8656
    東京都文京区本郷7-3-1　東京大学工学部2号館7階
ACCESS
  • 教授室:　 71D4号室
  • 03-5841-6361
  • 講師室:　 71D3号室
  • 03-5841-6360
  • 学生居室:　 71C2号室
  • 03-5841-6362
Contact us

Nagato・Kizaki Laboratory

The University of Tokyo
Graduate School of Engineering, Department of Mechanical Engineering Faculty of Engineering,
Department of Mechanical Engineering

  • 7F, Engineering Bldg. 2, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo　Zip Code：113-8656
東京大学
東京大学大学院工学系研究科
東京大学大学院工学系研究科機械工学学科
東京大学 RACE 人工物工学研究センター 社会連携講座
CROCES
DX-GEM

＠2024 東京大学 大学院工学系研究科 機械工学専攻
長藤・木崎研究室　 All Rights Reserved.

＠2024 東京大学 大学院工学系研究科 機械工学専攻　長藤・木崎研究室　 All Rights Reserved.

＠2024 東京大学 大学院工学系研究科 機械工学専攻　長藤・木崎研究室　 All Rights Reserved.